Beam Bending Point Load Fixed Calculator

Beam Bending Point Load Fixed Calculator

MaterialYoung’s Modulus (E) [GPa]Yield Strength (σy) [MPa]Ultimate Strength (σu) [MPa]Density (ρ) [kg/m³]
Steel2102504607850
Aluminum701101202700
Copper1101902208960
Brass1052003008500
Titanium1102402904500

To calculate the beam bending under a point load for a fixed beam, we need to understand a few fundamental concepts in mechanics of materials. The beam bending calculation involves determining the bending moment and shear force at any section along the beam. In this article, we will focus on the calculation of the bending moment and stress due to a point load on a fixed beam.

1. Basic Concepts and Formulas

  • Bending Moment (M): The bending moment at any section of a beam is the algebraic sum of the moments of all external forces acting on one side of the section.For a point load P acting at a distance a from the support, the bending moment at a distance x from the support is given by:M(x)=P(a−x)
  • Section Modulus (Z): The section modulus is a geometric property of the beam cross-section that relates the bending moment to the bending stress.Z=cI​where I is the moment of inertia of the cross-section, and c is the distance from the centroid to the outermost fiber of the cross-section.
  • Bending Stress (σ): The bending stress at any point in the cross-section is given by:sigma=ZM​

2. Calculation Example

Let’s consider a fixed beam made of steel with a rectangular cross-section (b = 50 mm, h = 100 mm). A point load of 10 kN acts at a distance of 1 m from the support.

Step 1: Calculate the Moment of Inertia (I)

For a rectangular cross-section:

I=12bh3​

I=1250×1003​=4.167×106mm4

Step 2: Calculate the Section Modulus (Z)

For a rectangular cross-section:

c=2h​=50mm

Z=cI​=504.167×106​=8.333×104mm3

Step 3: Calculate the Bending Moment (M)

M=P(a−x)

At the point of maximum bending moment (x = 0):

Mmax​=P(a−0)=10×1000=10kNm

Step 4: Calculate the Bending Stress (σ)

sigma=ZM​

sigma=8.333×10410×106​=120MPa

3. Comparison for Different Metals

Now, let’s compare the bending stress for the same beam and loading conditions but made of different materials.

3.1 Steel

  • Bending Stress (σ): 120 MPa
  • Allowable Stress: Typically, the allowable stress for steel is taken as a fraction of the yield strength (e.g., 0.6σy).

sigmaallowable​=0.6×250=150MPa

Since 120 MPa < 150 MPa, the beam is safe under the given loading conditions.

3.2 Aluminum

  • Bending Stress (σ): 120 MPa
  • Allowable Stress: Typically, the allowable stress for aluminum is taken as a fraction of the yield strength (e.g., 0.5σy).

sigmaallowable​=0.5×110=55MPa

Since 120 MPa > 55 MPa, the beam made of aluminum would fail under the given loading conditions.

3.3 Copper

  • Bending Stress (σ): 120 MPa
  • Allowable Stress: Typically, the allowable stress for copper is taken as a fraction of the yield strength (e.g., 0.6σy).

sigmaallowable​=0.6×190=114MPa

Since 120 MPa > 114 MPa, the beam made of copper would fail under the given loading conditions.

3.4 Brass

  • Bending Stress (σ): 120 MPa
  • Allowable Stress: Typically, the allowable stress for brass is taken as a fraction of the yield strength (e.g., 0.6σy).

sigmaallowable​=0.6×200=120MPa

Since 120 MPa = 120 MPa, the beam made of brass is at its limit and may fail under additional load or due to other factors (e.g., fatigue).

3.5 Titanium

  • Bending Stress (σ): 120 MPa
  • Allowable Stress: Typically, the allowable stress for titanium is taken as a fraction of the yield strength (e.g., 0.6σy).

sigmaallowable​=0.6×240=144MPa

Since 120 MPa < 144 MPa, the beam made of titanium is safe under the given loading conditions.

4. Conclusion

The calculation of beam bending under a point load for a fixed beam involves determining the bending moment and stress at any section of the beam. The results show that the beam made of steel and titanium is safe under the given loading conditions, while the beams made of aluminum, copper, and brass would fail. The allowable stress for each material is based on a fraction of its yield strength, which is a crucial factor in the design and selection of materials for beam structures.

5. Contact Information

For further inquiries or assistance, please contact us at:


Tag: #BeamBendingCalculation #FixedBeams #PointLoad #MechanicalEngineering #MaterialSelection

Share:

Facebook
Twitter
LinkedIn
Pinterest
WhatsApp
Skype
Facebook
X

Request A Quote

Contact us feel free to call or write anytime, We will call you back soon!

Download

Contact us feel free to call or write anytime, We will call you back soon!

Download

Contact us feel free to call or write anytime, We will call you back soon!

Download

Contact us feel free to call or write anytime, We will call you back soon!

We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.

Download

Fill Out The Form To Get Our Latest Catalog