Bending Calculator
Using the data below, you will get the parameters of bending
Material (KN/mm2) – material tensile strength
Thickness (mm) – thickness of material to bend
Length (mm) – main width of the part to be bended
Die Opening (mm) – opening of the bending die
Min. rest length (mm) – minimum necessary length of rest of the sheet before the bend
Internal radius (mm) – internal radius of bended shape
Bending force (Tons) – total necessary force to execute the bend
* calculations are for air bending
The recommended V-opening width of bottom die:
| S | 0.5-3mm | 3-8mm | 9-10mm | >12mm |
|---|---|---|---|---|
| V | 6*S | 8*S | 10*S | 12*S |
