How To Choose J23 Punch Machine By Structure And Function?

J23 punch machine is a mechanical device for sheet metal processing, with a variety of functions and a wide range of applications. It adopts the stamping process, through the movement of the die and the slider, the metal material punching, punching, bending, forming, pressing and other processing operations.

J23 Punch Machine Structure:

Main frame: The main frame is the main support structure of the press, usually composed of rigid cast parts or welded structures, with enough strength and rigidity to withstand the impact pressure and vibration during processing.

Slider mechanism: slider mechanism is an important part of the press, mainly composed of slider, slider guide, crank connecting rod mechanism and upper dead center holding mechanism.

Slider: The slider is a movable part of the press moving up and down, and the punch die is installed on it to complete the stamping operation.

Slide guide: Slide guide is the guide structure of the slide block, usually in the form of wire rails or guide posts, to ensure the smooth and accurate movement of the slide block.

Crank connecting rod mechanism: The crank connecting rod mechanism transfers the rotating motion of the motor or CAM to the slider through the connecting rod to achieve the up and down movement of the slider.

Top dead center holding mechanism: The top dead center holding mechanism is used to hold the slider in its upward position for a period of time in order to complete the punching action of the punch press.

Operating system: The operating system is the control center of the press, usually including the electrical control cabinet, control buttons, touch screen and other parts, used to control the start, stop and adjust the operation of the press.

Electrical control cabinet: The electrical control cabinet is a control system composed of electronic components and main control boards in the equipment, which is used to control various action, transmission and protection functions.

Control button: The control button is usually located on the operating table of the device and is used by the operator to control the start, stop and emergency shutdown of the press.

Touch screen: Touch screen is a common operating interface of modern presses, which can intuitively monitor the operating status of the equipment, and perform parameter adjustment and troubleshooting operations.

Transmission system: Transmission system is the power transmission device of the press, usually composed of a motor, drive shaft, gear and clutch, etc., used to transfer the power of the motor or CAM to the slider and other mechanical parts.

J23 Punch Machine Functions:

Punching shape: J23 punch machine can be used to punch holes in sheet metal materials through punching molds. Punching dies are usually made of cemented carbide materials, and the metal material is punched out of the desired shape and size of the hole through the impact force.

Punching: The J23 punch machine can cut sheet metal material to the desired shape and size by punching the die. Punching die usually uses a blade or tool, through the impact force to cut metal materials, you can get straight lines, curves, corners and other different shapes of cutting parts.

Punching machine: The J23 punch machine can press the metal material into a concave or convex shape by punching the die. According to the process requirements, the punching mold can be rushed out of the raised pattern, text, graphics, etc., and can also make special shapes such as concave molds and grooves.

Bending/bending: The J23 punch machine can bend or bend sheet metal materials with a specific die. A bending die usually consists of an upper and lower module that moves up and down through a slider to make the metal material perform the desired bending or bending operation in the die.

Forming: The J23 punch presses the metal material into the desired shape through the forming die. The forming die is usually composed of a number of modules, through the up and down movement of the slider, the metal material is stamped into a complex three-dimensional shape, such as a bowl, a cylinder, etc.

Press riveting/pressing: The J23 punch machine can connect metal materials to other parts by pressing riveting or pressing dies. Crush riveting or pressing molds usually have a specific concave and convex shape, and through the up and down movement of the slider, the metal material and other parts are tightly connected.

J23 punch machine has the characteristics of high efficiency, accuracy and stability, and can adapt to different processing needs by adjusting parameters and changing different molds. At the same time, it also has low energy consumption and good safety performance. All in all, J23 punch is a powerful mechanical equipment, through the stamping process to achieve a variety of processing operations on sheet metal materials, widely used in the metal products processing industry. Its excellent performance and flexibility make it an important tool for improving production efficiency and product quality.

1 thought on “How To Choose J23 Punch Machine By Structure And Function?”

Leave a Comment

Your email address will not be published. Required fields are marked *

Request A Quote

Contact us feel free to call or write anytime, We will call you back soon!

We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.

Download

Fill Out The Form To Get Our Latest Catalog